Concrete pricing depends heavily on size, finish, and site prep. This guide breaks down typical per-square-foot ranges by project type — so you know roughly what to expect before a contractor measures your space.
Standard broom-finish concrete, installed
Typical patio project, start to finish
Stamped or decorative concrete
Cost to you for the match
Two patios the same size can still land on very different bids. Here's why.
Price is typically quoted per square foot, but curved edges, borders, or irregular shapes take more labor than a simple rectangle.
A standard broom finish is the most affordable option. Stamped patterns, exposed aggregate, and staining all add cost for materials and labor.
Removing an old slab, grading a sloped yard, or clearing landscaping before the pour adds cost that's easy to underestimate.
Driveways and areas that carry vehicle weight need thicker concrete and rebar or wire mesh reinforcement, which patios and walkways typically don't.
A backyard patio reachable only through a narrow side gate often costs more than a driveway a truck can pour directly into.
Some cities require a permit for driveway or drainage work, which can add time and a modest fee to the total project cost.
Ranges below assume a standard broom finish unless noted. An on-site quote is the only way to get a number specific to your yard.
A standard concrete patio, poured and finished. Most residential patios run 200–500 sq ft.
Narrower pours with less total square footage, but still require forming, grading, and finishing.
Thicker slab and reinforcement needed to carry vehicle weight, which raises the per-square-foot cost.
Often includes broom or light texture finishing for slip resistance around water.
Priced by face square footage; varies widely with wall height and whether engineering is required.
Stamped patterns, exposed aggregate, or staining added to any of the above project types.
A plain, textured surface created by dragging a broom across the wet concrete. It's the most common and most affordable finish for patios, walkways, and driveways.
Best for homeowners who want a clean, durable surface without the added cost of decorative work.
Stamped concrete is patterned to resemble stone, brick, or tile before it cures, while stained or exposed-aggregate finishes add color and texture.
Best for a more designed look, especially on visible areas like a front walkway or pool deck.
Not always — demolition and haul-away of an existing slab is often a separate line item. Ask your contractor whether it's included in their quote.
It depends on your city and the project. Driveway and drainage work more commonly require a permit than a simple patio. Your contractor should confirm what's needed before starting.
These are general industry ranges, not a quote for your project. An on-site visit is the only way to get an exact number based on your yard, access, and finish choice.
Often, yes. A bid far below the typical range can mean thinner concrete, no reinforcement where it's needed, or corners cut on site prep. Ask what's included before assuming it's a deal.
No. This guide and the quote request are both free. Texas Slab is a connection service — we don't perform the work or charge for the match, and you only pay if you move forward with a contractor.
Request a free quote and get matched with a licensed local concrete contractor who can measure your space and give you an exact price.